Back to top

IsoTex F50

Fine, mineral topcoat plaster for exterior and interior use

ab 36,40 €

3,31 € / kg

Lieferzeit: 3-5 working days

Produkt enthält: 1 kg – 11 kg

SKU: N/A

Mineral smooth plaster

IsoTex F50 is a fine, mineral-based smooth plaster for interior and exterior use. It is used as a final surface and levelling layer in the ClimateCoating® IsoTex system – especially on IsoTex R70 thermal insulation plaster.

Thanks to its fine grain size and low bulk density, IsoTex F50 produces a smooth, even and low-stress surface. Unevenness in the insulating plaster is reliably evened out. At the same time, IsoTex F50 forms the ideal basis for subsequent ClimateCoating® coatings – for example for the ThermoProtect facade paint or for high-quality interior wall coatings such as ThermoPlus, Lumen or Thermovital.

In combination with IsoTex R70 and ThermoProtect facade paint, IsoTex F50 supports physically effective moisture management.

Smoothly plastered with ease

Thanks to its fine grain size and low bulk density, IsoTex F50 is a particularly easy-to-apply smooth plaster. With a consumption of just 0.65 kg/m² per mm layer thickness, it is easy to apply and produces a homogeneous, smooth surface. The plaster can be applied manually with a trowel or mechanically with a sprayer. IsoTex F50 is suitable for plastering brick, concrete, reinforced concrete, aerated concrete, wood and metal substrates indoors and outdoors

ClimateCoating® IsoTex system – The energy-saving trio for smooth façades

IsoTex F50 is applied to the IsoTex R70 thermal insulation render and forms the final, smooth render layer. After drying, the surface can be coated with ClimateCoating® functional paints, such as ThermoProtect for facades.

IsoTex System Functionality DE

This is made possible by the combination of thermal insulation plaster and the reflective membrane technology contained in the ClimateCoating® functional paint. The facade coating acts like an intelligent membrane: when it rains, it only absorbs a limited amount of water without passing it on to the masonry behind it. After a short period of saturation, the membrane blocks so that no further water is absorbed – regardless of the duration of the precipitation. This keeps the amount of evaporation low. As with exterior renders in accordance with EN 998-1, the coating can be classified as water-repellent.

ThermoProtect facade paint is also extremely resistant to environmental influences such as UV radiation and acid rain. Its antistatic effect significantly reduces dust adhesion. There are documented facades where, even after more than 20 years, the membrane-like coating is intact, crack-free and fully functional – thus maintaining its energy-saving effect in the long term (see project Perleberg – facade coating with ThermoProtect and press report).

The combination of ThermoProtect façade coating with IsoTex R70 thermal insulation plaster and IsoTex F50 stucco plaster clearly demonstrates the benefits of the revolutionary IsoTex thermal insulation system: a long service life, comprehensive weather protection and a sustainable reduction in heating and air conditioning costs.

application: spray diffuser, trowel
for indoors and outdoors
open to diffusion
very light
Weight 11,0 kg
Dimensions 49 × 23 × 12 cm
weitere Eigenschaften

fine-grained (approx. 1.0 mm)

Technische Parameter

ingredients: white cement (20%), hydrated lime (30%), finely ground limestone, carbonate (8%), lightweight filler (29%), quartz sand 0.1-0.3 mm (13%), dispersion, aeration additive, hydrophobization up to 1%.

Gebindegrößen

11 kg, 11 kg x 54/pallet

Farbe, Anwendung, Verarbeitung

consumption: 0.65 kg/m² per mm layer thickness, for indoor and outdoor use, old white / off-white, recommended maximum application thickness of one coat = 3 mm, with a trowel or by spraying

Icons

24 h drying time,

application: spray diffuser, trowel

,

for indoors and outdoors

,

open to diffusion

,

very light
Technical Data Sheet (pdf, 220KB)
Material Safety Data Sheet (pdf, 165KB)


    Withdraw from contract